and attractive offers
cost-effective
and money back guarantee
customer service
from 75€
Article details
SW-Motech SBL, crash guards
Article No.: 11088188
The crash guards are made of sturdy steel tubing with a large diameter and a weather- and corrosion-resistant powder coating to match the respective motorcycle model. The surface finishing is done in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic.
Crash guards from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are specifically manufactured for the motorcycle type, fit seamlessly into the vehicle's appearance and at the same time offer optimal lean angle clearance. Custom-made attachment elements enable a resilient and easy installation at the original mounting points.
Features
- Made of robust steel tubing with a large diameter
- Weather- and corrosion-resistant powder coating
- Reliable protection of important components
- Extremely stable construction that matches the appearance of the motorcycle
- Model-specific development guarantees precise fit and resilient frame connection
- Optimal lean angle freedom guaranteed
- Easy to install by screwing it to the factory-installed frame mounting points
Contents
- Crash guards
- Installation instructions
- Mounting hardware
Notes
- Please note the comments/restrictions specific to the variant
- The products were developed for vehicles in their original condition
- Compatibility with accessories from other manufacturers cannot be guaranteed
- It is recommended that the installation be carried out by a specialist mechanic
- This product does not require approval and therefore does not require any test marks, expert opinions or general operating licenses
- The information in the installation instructions must be observed
Comments/restrictions
Variant | Note |
---|---|
SBL.01.052.10000/B | |
SBL.01.070.10001/B | |
SBL.01.070.10002/B | |
SBL.01.083.100 | Not suitable for the special model California. |
SBL.01.084.10000/B | |
SBL.01.132.10002/B | For mounting, the reflector on the frame must be removed and the reflector included in the scope of delivery must be attached to the fork. |
SBL.01.215.100 | |
SBL.01.331.10000/B | |
SBL.01.399.10001/B | |
SBL.01.466.100 | |
SBL.01.492.10000/B | |
SBL.01.529.10001/B | |
SBL.01.591.10000/B | |
SBL.01.622.10100 | |
SBL.01.622.10101 | |
SBL.01.662.10001/B | |
SBL.01.746.10000/B | |
SBL.01.767.10000/B | |
SBL.01.808.10001/B | Fits with original driver's enduro footrests, can be mounted in conjunction with the original Honda pillion footrests |
SBL.01.843.10001/B | |
SBL.01.877.10001/B | |
SBL.01.887.10000/B | |
SBL.01.887.10001/B | |
SBL.01.889.10000/B | |
SBL.01.903.10000/B | |
SBL.01.903.10001/B | |
SBL.01.906.10000/B | |
SBL.01.926.10000/B | |
SBL.01.942.10001/B | |
SBL.01.950.10001/B | |
SBL.01.971.10000/B | |
SBL.02.066.10000/B | |
SBL.04.214.10001/B | |
SBL.04.338.10000/B | |
SBL.04.430.10000/B | |
SBL.04.430.10000/O | The color of the crash guard differs from the orange color of the original KTM parts. |
SBL.04.488.100 | |
SBL.04.539.10002/B | |
SBL.04.641.10000/B | |
SBL.04.835.10001/B | |
SBL.04.873.10000/B | |
SBL.04.915.10000/B | |
SBL.04.915.10000/EB | |
SBL.04.918.10000/B | |
SBL.04.918.10000/EB | |
SBL.04.918.10100/B | |
SBL.04.958.10000/B | |
SBL.05.170.100 | |
SBL.05.192.10000/B | |
SBL.05.339.100 | |
SBL.05.440.10000/B | |
SBL.05.440.10001/B | |
SBL.05.587.10000/B | |
SBL.05.670.10000/B | |
SBL.05.670.10001/B | |
SBL.05.674.10000/B | |
SBL.05.757.10000/B | |
SBL.05.845.10000/B | |
SBL.05.845.10001/B | |
SBL.05.846.10000/B | |
SBL.05.908.10000/B | |
SBL.05.936.10000/B | |
SBL.05.965.10000/B | |
SBL.06.036.10000/B | |
SBL.06.162.10000/B | |
SBL.06.284.100 | Suitable for vehicles with or without catalytic converter |
SBL.06.343.10001/B | |
SBL.06.480.10001/B | |
SBL.06.522.10001/B | |
SBL.06.525.10000/B | |
SBL.06.567.10001/B | |
SBL.06.593.10002/B | |
SBL.06.627.10001/B | |
SBL.06.642.10000/B | |
SBL.06.642.10001/B | |
SBL.06.799.10002/B | |
SBL.06.851.10001/B | |
SBL.06.859.10000/B | |
SBL.06.861.10000/B | |
SBL.06.921.10001/B | |
SBL.06.977.10000/B | |
SBL.07.101.100 | |
SBL.07.304.10001/B | |
SBL.07.405.100 | |
SBL.07.409.100 | |
SBL.07.427.10000/B | |
SBL.07.512.10000/B | |
SBL.07.556.10001/B | |
SBL.07.562.100 | Valve covers remain accessible when crash guard is mounted |
SBL.07.562.10100/B | |
SBL.07.592.10001/B | |
SBL.07.606.10000/B | |
SBL.07.629.100 | |
SBL.07.649.10002/B | |
SBL.07.775.10000/B | |
SBL.07.783.10001/B | Does not fit in conjunction with BMW OEM cylinder protection. |
SBL.07.783.10100 | Does not fit in conjunction with BMW OEM cylinder protection. |
SBL.07.897.10000/B | |
SBL.07.904.10001/B | |
SBL.07.904.10101 | |
SBL.07.909.10000/B | |
SBL.07.945.10000/B | |
SBL.07.949.10000/B | |
SBL.07.954.10000/B | The fairing must be removed to install the crash guards. Please follow the installation instructions. |
SBL.07.975.10000/B | |
SBL.08.297.10002/B | |
SBL.08.508.10000/B | |
SBL.08.518.10000/B | |
SBL.08.647.10000/B | |
SBL.08.866.10000/B | |
SBL.08.868.10000/B | |
SBL.08.875.10000/B | |
SBL.08.891.10000/B | |
SBL.08.922.10000/B | |
SBL.08.923.10000/B | For mounting, the side panels must be drilled in two places. For further information, please refer to the mounting instructions. |
SBL.08.933.10000/B | |
SBL.10.033.10000/B | |
SBL.11.249.10000/B | |
SBL.11.419.10000/B | |
SBL.11.485.10000/B | |
SBL.11.553.10001/B | |
SBL.11.610.100 | |
SBL.11.667.10003/B | |
SBL.11.749.10000/B | |
SBL.11.842.10000/B | |
SBL.11.848.10000/B | |
SBL.11.884.10000/B | |
SBL.11.905.10100/B | |
SBL.11.929.10000/B | |
SBL.11.953.10000/B | |
SBL.11.991.10001/B | |
SBL.13.849.10000/B | |
SBL.17.038.10000/B | |
SBL.17.925.10000/B | |
SBL.18.911.10000/B | |
SBL.22.088.10000/B | |
SBL.22.114.10000/B | To mount the crash guard, the water pump guard installed by Ducati must be removed. To protect the water pump, the appropriate SW-MOTECH water pump guard SCT.22.114.10002 can be installed. |
SBL.22.142.10000/B | |
SBL.22.577.10001/B | |
SBL.22.584.10001/B | |
SBL.22.822.10000/B | |
SBL.22.995.10001/B | |
SBL.22.995.10002/B | |
SBL.23.017.10001/B | Installation by drilling out two mounting covers |
SBL.41.026.10000/B | |
SBL.41.789.10000/B | Only for models without carburetor |
SBL.41.937.10000/B | |
SBL.41.983.10000/B |
Suitable products
![]() |
SW-Motech SBL, upper crash guards New | from $ 166.84 |